SNMPTD Traps are not showing in alarm console.
Article ID: 378779
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
Issue/Introduction
Alarm Traps show in trap manager but do not show up in the alarm console
Environment
UIM 24.0. ANY
Probe: SNMPTD ANY
Cause
A preprocessing rule installed to clear all alarms from the snmptd robot coming into the UIM system
Resolution
The Preprocessing rule can be deactivated or modified to exclude the snmptd alarms.
Feedback
Yes
No
Powered by
