Alarm for gateway_firewall.service_router_with_gfw_per_edge_high

Products

• VMware vDefend Firewall

Issue/Introduction

Event ID: gateway_firewall.service_router_with_gfw_per_edge_high

Added in release: 9.0.0

Alarm Description:

• Purpose: The number of Tier0/Tier1 Logical Routers or bridges with Gateway Firewall feature enabled on an edge is approaching the maximum limit.

• Impact: Dataplane functions may be impacted due to high scale. Increased time for configuration to get realized.

Environment

VMware NSX Data Center 9.0.0

Cause

Number of T0/T1s/bridges with gateway firewall feature enabled scaled close to the allowed limits.

Note: For optimal performance and throughput, it is recommended to follow the guidelines below based on vDefend 9.0.0 Configuration Limits.

 

Edge Form Factor	Max number of Gateway Firewalls	Description
Medium	5	Deployed either as T0, T1 or Bridge mode on the same edge node
Large or Extra Large	10	Can be a combination of either T0, T1, or Bridges. If using only L4 / L7 without ATP - you can deploy up to 25 Firewalls
Baremetal	25	Can be a combination of either T0, T1, or Bridges. If using only L4 / L7 without ATP - you can deploy up to 100 Firewalls

 

Resolution

Reduce the number of gateways configured on the edge node. Map additional gateways to a new edge in the cluster.

Disable Gateway Firewall feature on the gateway if no firewall rules are configured.