vApp Network Firewall Rules are present in Cloud Director but not present in NSX-T
book
Article ID: 378391
calendar_today
Updated On:
Products
VMware Cloud Director
Issue/Introduction
- Firewall Rules were deleted in NSX-T
- Firewall Rules are present in Cloud Director
- FW Rules not present in NSX-T but exist in VCD
- vApp Edge FW rules not present in NSX-T
Environment
VMware Cloud Director 10.5.x
Cause
This issue can occur when the Firewall Rules are deleted in NSX.
For vApp Edges, Cloud Director will keep a record of these rules to assist with Powering On and Off of the vApp.
Resolution
- Navigate to the Tenant.
- Open the VDC.
- Open the vApp.
- Click Networks.
- Select the Network via the Radio Button.
- Click Reset and follow the dialog box.
Note: As a result of a Reset, a temporary network outage may be experienced. |
Feedback
thumb_up
Yes
thumb_down
No