I'm having problems getting my QSFP adapter to work on my AppNeta monitoring point
search cancel

I'm having problems getting my QSFP adapter to work on my AppNeta monitoring point

book

Article ID: 375130

calendar_today

Updated On:

Products

AppNeta

Issue/Introduction

We are trying to configure configure our R1000 interface and having problems:

https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/appneta/GA/appliance-overview/r90-mp-intro/r90-specifications1/r90-mp-port-descriptions.html

Resolution

AppNeta can confirm the following range of SFP/SFP+/SFP28/QSFP/QSFP28 modules (both optical and electrical) are supported on ports 2 and 3. 

AppNeta has validated the following 40G QSFP+ modules:
- FluxLight (CISCO-OEM) QSFP-40G-SR4
- Mellanox MMA1B00-B150D (40G SR4)

The following 100G QSFP28 modules:
- Arista QSFP-100G-CWDM4
- Juniper JNP-QSFP-100G-SR4
- Mellanox MMA1B00-C100D (100G SR4)
- Mellanox MMA1L30-CM (100G CWDM4)

If you are encountering issues, please verify if the adapter you are using is supported.   If you require additional assistance, please open a support ticket with Broadcom to assist.