Can I set my WIFI to be a default interface for my AppNeta Monitoring Point?

Products

• AppNeta

Issue/Introduction

We need to change our default interface from Ethernet to WIFI for our network implemenation

Resolution

This setting can be set in the Monitoring point's settings:

1.  Connect to the monitoring points WebUI using its LAN IP

http://<LAN IP>/

2. Click on Network Settings, then Network Interface on the left:

3.  This should provide a list of the network interfaces.  You can select which interface to be default:

4.  When the change has been made, you may need to restart networking.  Click the gear icon in the top right, and choose a restart option: