Project Team Detail TSV does not align/show the data properly when multiple value attributes are selected along with Actuals

book

Article ID: 37239

calendar_today

Updated On:

Products

CLARITY PPM FOR ITG CLARITY PPM FEDERAL Clarity PPM On Premise

Issue/Introduction

Problem:

The "Allocation by Period" Time Scaled Value (TSV) in the Team detail page does not align/show the data properly when multiple value attributes are selected if Actuals is the top value in the TSV and Allocation (Compare To) is set as a secondary value for the TSV.

Steps to Reproduce:

1.  In PPM, create a project and add one or more team members to the project. 

2.  From the project's Team tab, select 'Detail' from the 'Team' drop down.  

3.  Select Options->Configure-> List Column Section --> Fields 

4.  Click the properties icon corresponding to the "Allocation by Period" virtual attribute. 

5.  Select the following Value Attributes in this order: Actuals, Allocation, Hard Allocation 

6.  Check the 'Show Legend Column' option. 

7.  For 'Secondary Value', ensure 'Allocation (Compare To)' is selected. 

<Please see attached file for image>

Teamdetailconfig.JPG

8.  Click 'Save and Return', 'Save', then 'Return'. 

9.  In the TSV section, double click on any of the boxes, to do an inline editing. 

10. Enter 12 as Allocation and 10 as Hard Allocation. 

11.Click Save.

Expected Result: 12 should reflect corresponding to Allocation row and 10 should be reflecting against the Hard allocation.

Actual Result: 12 is reflected for Hard Allocation and Actuals, and 10 is showing in a 4th row. The Actuals value is not stored in the database, its just a display issue.

<Please see attached file for image>

Screenshot.JPG

 

Cause:

Caused by CLRT-78813

Workaround:

Change the order of the Value attributes so that Actuals should not be at the top, or remove Allocation (Compare To) in the 'Secondary Value' drop down.

1.  From the project's Team tab, select 'Detail' from the 'Team' drop down.  

2.  Select Options->Configure-> List Column Section --> Fields 

3.  Click the properties icon corresponding to the "Allocation by Period" virtual attribute. 

4. For Value Attributes, make sure Actuals is not the top value, or for 'Secondary Value' change the value to '[--Select--]'

5.  Check the 'Show Legend Column' option. 

6.  For 'Secondary Value', ensure 'Allocation (Compare To)' is selected. 

7.  Click 'Save and Return', 'Save', then 'Return'. 

Resolution:

CLRT-78813 is currently reviewed for a resolution

Environment

Release: ESPCLA99000-13.3-Clarity-Extended Support Plus
Component:

Attachments

1558723342173000037239_sktwi1f5rjvs16wt3.jpeg get_app
1558723340220000037239_sktwi1f5rjvs16wt2.jpeg get_app