DCI1100E: WARNING: NEW SYSTEM cpc-id/lpar-id/sys-id IS NOT MANAGED AND WILL AFFECT GRP/CG CALCULATION

Products

• Dynamic Capacity Intelligence

Issue/Introduction

DCILOG of the Dynamic Capacity Intelligence (DCI) Controller shows the following error messages repeated every five minutes:

DCI1100E: WARNING: NEW SYSTEM 1234/ABCLP01/LP03 IS NOT MANAGED AND WILL AFFECT GRP/CG CALCULATION          
DCI1100E: WARNING: NEW SYSTEM 1234/ABCLP02/LP02 IS NOT MANAGED AND WILL AFFECT GRP/CG CALCULATION          
DCI1100E: WARNING: NEW SYSTEM 1234/ABCLP01/LP01 IS NOT MANAGED AND WILL AFFECT GRP/CG CALCULATION          

Environment

Dynamic Capacity Intelligence 2.0 

Cause

DCI policy incorrectly setup

Resolution

On DCI Controller there is the following message:

DCI1100I: NEW CG CAPGRP1 FOUND AND ADDED TO POLICY 
DCI1101I: SYSTEM 1234/ABCLP01/LP03 CHANGED CG FROM  TO CAPGRP1 DYNAMIC CAPPING FOR BOTH GROUPS IS STOPPED  
DCI1101I: SYSTEM 1234/ABCLP02/LP02 CHANGED CG FROM  TO CAPGRP1 DYNAMIC CAPPING FOR BOTH GROUPS IS STOPPED
DCI1101I: SYSTEM 1234/ABCLP01/LP01 CHANGED CG FROM  TO CAPGRP1 DYNAMIC CAPPING FOR BOTH GROUPS IS STOPPED   

The three LPARs are actually part of this HMC Capacity Group (CAPGRP1), so you need to modify the DCI policy to include this CG too. After the policy is activated, the DCI1100E messages will  disappear.