Before the upgrade, the liagent service is running, but it is stopped after the upgrade

Products

• VMware NSX

Issue/Introduction

Before upgrade, there are LI logging server(s) configured and liagent service is running on the manager and edge nodes. Observed the LI logging server(s) are sill there, but liagent service is stopped on the manager and edge node after upgrade.

Environment

VMware NSXVMware NSX-T Data Center

Cause

Issue was seen after NSX-T upgrade from 3.2.3 to 3.2.4

This is an expected behavior.

Resolution

Start liagent service manually after upgrade by using cmd: "/etc/init.d/liagentd start" or run command "start service liagent" from NSX cli.

This issue is resolved in 4.2.1