Endevor Display Element SYNC Column

Products

• Endevor

Issue/Introduction

What do the letter(s) under the SYNC column mean when an Element is displayed.  

Environment

All supported Release

Resolution

The H (History), S (Sync) or C (Consolidation) indicator can appear in the SYNC column. The SYNC column is in the Summary of Levels section on the Element Browse, History, Changes, and Summary of Levels panels in the Endevor foreground interface and in Quick Edit. The H indicator is also shown in batch Print output. Component list history is not affected.  Any combination of these letters can be displayed in the SYNC Column. 

H = When a move or transfer WITH HISTORY is performed the element is marked with an H indication in the SYNC column 

S = When moving with history, if the sync point is found, Endevor moves the element from the FROM location to the TO location, appending the FROM location delta levels after the sync-point element.  If the 2 levels are different and if SYNC is specified, Endevor will first create a syn level at the target reflecting the differences between the base level of the FROM element and the target, then moves the element to the TO location and appends the FROM location delta levels to the target.  The S indication is visible in the SYNC column 

C = Consolidation - this means a consolidation of levels occurred.