SNMPCollector probe - Network Respond path related alert is not triggered

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

Configured Cisco router with IP SLA ICMP-echo. In snmpcollector monitoring profile enabled the data and static alarm for QOS_RESPONSEPATHTESTICMP_AVGRESPONSETIME.

Able to see data in OC, but no alert is triggered when the value crosses the threshold.

Environment

UIM: Any supported UIM version

probe: snmpcollector

Resolution

DrNimbus is helpful to troubleshoot to check if the related alarm if being send by the probe .Based on the alarm bus found that the alarm is excluded in the nas preprocessing. Once the filter is disabled the alarm is able to be triggered