How to remove the baseline_engine.QOS_MESSAGE queue

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)
• CA Unified Infrastructure Management On-Premise (Nimsoft / UIM)
• CA Unified Infrastructure Management SaaS (Nimsoft / UIM)

Issue/Introduction

Customer requested guidance on how to remove the baseline_engine.QOS_MESSAGE queue.

Environment

• DX UIM 20.4 or higher

Cause

• Guidance

Resolution

Quick delete steps:

1. Rt-click and deactivate the baseline_engine probe
2. Open the hub probe GUI
3. Select the Queues Tab
4. RT-click and delete the baseline_engine.QOS_MESSAGE queue
5. Click Apply and Ok
6. Restart the hub

Baselining is an option that produces baseline QOS data that is displayed in the performance reports once the baseline data is collected for a few weeks.

 

In the Admin Console, if you don't check the baseline box for a QOS metric for a given probe on a particular robot or set of robots that belong to a hub, you can deactivate the baseline_engine and prediction_engine probe on that hub without any adverse impact.

 

Later if you decide you/the customer needs to use baselining, you can enable those probes.

 

Here is the description from the Broadcom techdocs page.

 

Here is the techdocs page.

baseline_engine deployment