ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

How to receive clear alarm e-mail notification


Article ID: 34714


Updated On:


NIMSOFT PROBES Unified Infrastructure Management for Mainframe DX Unified Infrastructure Management (Nimsoft / UIM)


How to receive clear alarm e-mail notification


Release: UIM Server any version

nas:  any version


You can setup a Auto Operator profile in the NAS probe to send an email on an alarm clear message.

Set it up with Action of EMAIL to send a e-mail when the clear alarm occurs.

In your nas profile, check the appropriate severity (green for clear) or all severity's including clear so you will get an email when the alarm is cleared/closed.


In the nas under Setup->Message Supression, deselect Accept Automatic 'acknowledgement' of alarm and then you will see all OK/green/clear alarms in the console and in UMP. This option is either on or off and not settable per probe.

Make sure the profile is activated and restart the nas.