How to set Alarm_enrichment Loglevel and Logsize to capture information


Article ID: 34606


Updated On:


DX Infrastructure Management NIMSOFT PROBES


Proper location and key information for setting alarm_enrichment probe logsize and log levels


Any UIM Release


The alarm_enrichment probe pulls all of its information from the NAS.cfg file

In order to modify the Alarm_enrichment logsize and loglevel you need to edit the nas.cfg file using Raw Configure mode which is accessed by selecting the probe and holding down the SHIFT key and selecting rt-click->Raw Configure.

You will need to either edit or add the following keys to control this information and click Ok/Apply.

1) enrichment_loglevel = 0
2) enrichment_logsize =  100

In order for these to take affect you will need to restart the alarm_enrichment probe.