VMware Smart Assurance NCM: How to move device(s) from one network to another?
Article ID: 345319
Updated On:
Products
VMware
Issue/Introduction
Symptoms:
How to move device(s) from one network to another?
How to move device(s) from one network to another?
Environment
VMware Smart Assurance - NCM
Resolution
Below are the steps to move device(s) from one network to another.
1) On GUI, navigate to Tools -> System Administration, select Network -> Devices -> Manage.
In example here, device needs to be moved from network 'Natya' to 'Test'
2) Select and remove the device(s) which needs to be moved.
Click on Manage, the below window will appear, click Yes.
3) Navigate to second network on System Administration window. Select Devices -> Manage.
4) Select Unclassified and click Apply. The device which was earlier removed from first network would be on the left side bottom of the window. Select the device and click Add and Manage.
5) The device is now part of the second network 'Test'.
After the device(s) move operation, an automatic pull configuration job on moved devices is triggered by NCM.
1) On GUI, navigate to Tools -> System Administration, select Network -> Devices -> Manage.
In example here, device needs to be moved from network 'Natya' to 'Test'
2) Select and remove the device(s) which needs to be moved.
Click on Manage, the below window will appear, click Yes.
3) Navigate to second network on System Administration window. Select Devices -> Manage.
4) Select Unclassified and click Apply. The device which was earlier removed from first network would be on the left side bottom of the window. Select the device and click Add and Manage.
5) The device is now part of the second network 'Test'.
After the device(s) move operation, an automatic pull configuration job on moved devices is triggered by NCM.
Additional Information
Here the credentials associated to all the devices are defined at 'Global' level.
Feedback
Yes
No
Powered by
