ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

How to chose which alarms get sent via snmpgtw.


Article ID: 34387


Updated On:


DX Unified Infrastructure Management (Nimsoft / UIM) NIMSOFT PROBES


The snmpgtw subscribes directly to the alarm subject on the message bus. This gives snmpgtw an unfiltered view of all alarms before alarm-enrichment or nas processing. To setup snmpgtw to be more specific as to what traps get set out we can setup a new "outbound" queue and forward alarms to it via nas Auto-Operator (AO) profiles.


NAS probe version 4.73 - and above.


  • Create a new attach queue called snmpgtw with the subject of outbound within the hub configuration.
  • In snmpgtw configuration change the key "subject" with value "alarm" to "outbound".
  • In nas - Create a new Auto-Operator profile.
    • Change the Action Type to "repost"
    • Change the Subject to "outbound"
    • Set the appropriate matching criteria and action mode to fit your requirements.

Additional Information