ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
How do I remove/delete a robot?
Article ID: 34352
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
NIMSOFT PROBES
Issue/Introduction
Introduction:
Steps for permanently removing or deleting a robot.
Question:
How do I remove/delete a robot?
Environment:
Unified Infrastructure Manager, Infrastructure Manager GUI
Answer:
Open Infrastructure Manager, then select the hub the robot is connected to
- Select the hub probe and press CTRL-P to bring up the Probe utility window
- Select 'removerobot' in the Probe commandset drop down list
- Enter the name and IP address in the text field (bottom left)
- Press enter
The robot will now be removed from the hub.
Additional Information:
UIM 8.3.1 Documentation Wiki
https://docops.ca.com/display/UIM83/Remove+Master+Devices
Environment
Release:
Component: CAUIM
Component: CAUIM
Feedback
Yes
No
Powered by
