How to create an Auto-Operator profile from an alarm message

book

Article ID: 34310

calendar_today

Updated On:

Products

DX Infrastructure Management NIMSOFT PROBES

Issue/Introduction

This article describes a method for creating a nas profile from an alarm message.

It is useful to be able to create a nas profile for alarms that are delivered from a probe yet there is no profile configured to alert or notify the correct personnel to handle the alarm.

 

Environment

UIM 8.x or later

Resolution

Open the nas probe configuration gui in Infrastructure Manager and select the Status tab.

Select an alarm from the Status tab in the nas, right-click and select Create -> Auto Operator Profile

  • This will fill in the filter fields.



You can customize alarm filter as required.

 

Additional Information

Customization,developing reports or portals is Out of Support Scope

If you need more help on it, please open a thread in the UIM Community:

https://community.broadcom.com/enterprisesoftware/communities/community-home/digestviewer?CommunityKey=170eb4e5-a593-4af2-ad1d-f7655e31513b

Or you can engage our partner HCL Technologies. 
The Enterprise Studio team of HCL (formerly the Services group within CA Technologies) can be reached at [email protected]

 

Attachments

1558699739068000034310_sktwi1f5rjvs16os7.jpeg get_app
1558699736922000034310_sktwi1f5rjvs16os6.jpeg get_app