Robot 7.70 will not start in proxy mode

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

There is currently an issue with 7.70 robot using proxy_mode and first_probe_port is empty, 48000, or 48001.??

?robot.cfg has:

• first_probe_port =
  • Note: this will occur if the first_probe_port is not set, as in the example above,?or?if it is set to 48000 or 48001
• proxy_mode = 1

Workaround is to set first_probe_port = 48002 and then restart the robot.?
?
?

Environment

Release:
Component: CAUIM