How do I copy probe configuration to another probe or probes?
book
Article ID: 34043
calendar_today
Updated On:
Products
DX Infrastructure ManagementNIMSOFT PROBES
Issue/Introduction
Short Description:
1. Drag and drop the probe, e.g., url_response probe Using the Infrastructure manager, simply drag and drop the configured url_response probe back into the local Archive.
2. Rename the package In the dialog window that comes displays, make sure to save as 'Configuration only' and rename it to something like url_response_template.
3. Drag and drop the probe package onto the target robot/node where the url_response is already deployed.
Note that you can use this approach to copy probe configuration for any Nimsoft probe.
A detailed description of the process is presented below:
Infrastructure Manager Help documentation link: ? http://docs.nimsoft.com/prodhelp/en_US/Monitor/InfrastructureManager/InfrastructureManager-4.08.pdf ? Please refer to the 'Technical Tips' section in ? Chapter 4: Infrastructure Manager User Guide on page131. The following is an excerpt. ? Example, Copying a probe configuration to another probe This is very useful if you have configured a probe on one robot and you want to the configuration parameters on the same type of probe installed on other Robots. In this example we use the emailgtw probe. ? 1. Log on to the Hub where Robot with the probe configuration you want to use as source is installed. Select the emailgtw probe from the probe list in the Infrastructure Manager. Drag and drop the probe into the Archive.
<Please see attached file for image>
? ? 2. The Update packages dialog will then appear. Press the Rename button and give the package a descriptive name (e.g. emailgtw-master).
<Please see attached file for image>
? 3. Ensure that the 'Configuration Only' option is checked and press the OK button. You will now end up with a new package in the archive. Now you can select the Probe configuration package and drag and drop it on the selected targets/robot(s).
<Please see attached file for image>
? 4. The distribution progress window will appear, and the configuration of the probe is completed as soon as the distribution process is finished.
<Please see attached file for image>
? ? ? ?
keywords: copy probe configuration another probe distribute nodes config many drag and drop drag-and-drop package packages