ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Cannot connect to UMP via Android or iOS mobile app
Article ID: 33992
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
NIMSOFT PROBES
Issue/Introduction
NMS/UMP 7.1
1) removed the webapps\mobile folder from the wasp probe directory
2) removed the mobile.war file from webapps
3) removed the mobile_webservices.war file from the webapps folder if it exists.
4) removed the mobile.war 2.60 and mobile_webservices probes from the archive.
5) removed the mobile section from the wasp.cfg
6) deactivate wasp and then activated it again
7) then deployed the mobile probe 6.6 again.
1) removed the webapps\mobile folder from the wasp probe directory
2) removed the mobile.war file from webapps
3) removed the mobile_webservices.war file from the webapps folder if it exists.
4) removed the mobile.war 2.60 and mobile_webservices probes from the archive.
5) removed the mobile section from the wasp.cfg
6) deactivate wasp and then activated it again
7) then deployed the mobile probe 6.6 again.
Environment
Release:
Component: CAUIM
Component: CAUIM
Feedback
Yes
No
Powered by
