Juniper SDSN for NSX - vSRX v15.1X49-D101 Security Director Policy Enforcer-v 17.1

Products

• VMware NSX

Issue/Introduction

This article provides information about the Juniper Advanced Security Solution(vSRX) for NSX.

Disclaimer: The partner product referenced in this article is a software module that is developed and supported by a partner. Use of this product is also governed by the end user license agreement of the partner. You must obtain from the partner the application, support, and licensing for using this product. For more information, see Understanding Juniper SDSN for VMware NSX Integration.

Environment

VMware NSX for vSphere 6.2.x
VMware NSX for vSphere 6.3.x

Resolution

Juniper SDSN for NSX - vSRX v15.1X49-D101 Security Director Policy Enforcer-v 17.1

Supported Software

• JunOS Space Security Director 17.1 (VMware recommended version is 17.1R2)
• Policy Enforcer 17.1 ( VMware recommended version is 17.1R2)
• vSRX v15.1X49-D101
• VMware NSX – 6.2.4/6.3.0
• VMware ESXi – 5.5 and above (For 6.5 see the note below)
• VMware vCenter Server – 6.0 and above

Lib version:

VMware-NetX-6.2.3-3817467

Note: To deploy service is ESXi 6.5 version ,add the deployment spec for the Juniper service registered. In vCenter Web Client, Go to Networking and Security> Service Definitions> Select Juniper Service > Manage > Deployment. Under specification, click + . For 6.5.*, OVF url same as present for 5.5 and 6.0 version and VMCI set to enabled.

Product Overview

For more information, see Understanding Juniper SDSN for VMware NSX Integration.

Product interoperability matrix with VMware products

For more information, see Understanding Juniper SDSN for VMware NSX Integration.

Steps to download and install the product on VMware products

1. To set up a Junos Space Virtual Appliance, see the Junos Space Virtual Appliance Installation and Configuration Guide.
2. Install the Security Director application. For more information, see Adding a Junos Space Application.
   
3. Download and install the matching Junos OS schema to manage SRX Series devices. For more information, see Updating a DMI Schema.
   
4. 
   Download, deploy, and configure the Policy Enforcer virtual machine. For more information, see Deploying and Configuring the Policy Enforcer Virtual Machine.
   
5. Add Policy Enforcer in Security Director. For more information, see Identifying the Policy Enforcer Virtual Machine In Security Director.

Support Information:

Troubleshooting (logs, procedures and techniques)

For more information, see the SRX Getting Started - Troubleshooting Commands.

Collection of NetX logs from partner SVM and Partner Manager

Partner Management Console and SVM Logs Location

Policy Enforcer:

• /var/log/nsxmicro.log
• /var/log/nsx_callback_listener.log
• /var/log/ssh_listener.log
• /var/log/sd_event_listener.log
  

SVM logs:

• /var/log/messages

Security Director:

• /var/log/jboss/server.log

Product Documentation

For more information, see Understanding Juniper SDSN for VMware NSX Integration.

Download Site

• Junos Space Virtual Appliance
• vSRX
• Junos Space Security Director
• Policy Enforcer

Support Process

For more information, see Contact Support.

Escalation Process

Standard Juniper escalation process. For more information, see Contact Support.

Contact Information

Call Juniper Customer Support at 1888-314-5822.

Additional support information:

For more information Error codes, see Juniper Network System Log Explorer.