VMware NSX for vSphere 6.0 Service Virtual Machines (SVM) on autodeploy setup require a manual restart after an ESXi host reboot
search cancel

VMware NSX for vSphere 6.0 Service Virtual Machines (SVM) on autodeploy setup require a manual restart after an ESXi host reboot

book

Article ID: 339184

calendar_today

Updated On:

Products

VMware NSX Networking

Issue/Introduction

Symptoms:
On stateless VMware ESXi hosts, Service Virtual Machine (SVM) appliances such as the Guest Introspection or partner appliances fail to boot.



Environment

VMware NSX for vSphere 6.0.x
VMware NSX for vSphere 6.1.x

Resolution

This issue is resolved in NSX for vSphere 6.1 and later, available at VMware Downloads. For more information, see the NSX for vSphere 6.1 Release Notes.

If you are unable to upgrade, you can work around this issue by restarting the Service Virtual Machine (SVM) appliance manually.

To work around this issue, restart the SVM appliance manually. Alternatively, use the Resolve under Networking & Security > Installation > Service Deployments > Installation Status in the NSX Plug-in.


Additional Information


Guest Introspection アプライアンスなどの autodeploy セットアップ上の VMware NSX for vSphere 6.x サービス仮想マシン (SVM) は、ESXi ホストの再起動後、手動で再起動する必要がある
自动部署设置的 VMware NSX for vSphere 6.x Service Virtual Machines (SVM)(例如 Guest Introspection 设备)在 ESXi 主机重新引导后需要手动重新启动