The JMR does display the COND CODE=0000 on the panel when the JMR collected the S722 abend of JOBLOG.
Is this correct?
--------- JOBLOG MANAGEMENT & RETRIEVAL SYSTEM V4.6 --------- LINE1 - 2 / 2
COMMAND ===> SCROLL ===> CSR
CMD JOBNAME JOBNO DATE TIME SYSTEM ERROR HIGHEST SYSOUT
COND CODE PRINT LINES
USERO022 1234 YY/MM/DD 13:55:18 nnnn *CANCELLED 0000 119 <=== Error point here
******************************* Bottom of data ********************************
Release: JMR 4.6
APAR QO61615 correct to this problem.
The result of the test after applied the QO61615.
--------- JOBLOG MANAGEMENT & RETRIEVAL SYSTEM V4.6 --------- LINE1 - 2 / 2
COMMAND ===> SCROLL ===> CSR
CMD JOBNAME JOBNO DATE TIME SYSTEM ERROR HIGHEST SYSOUT
COND CODE PRINT LINES
USERO022 1234 YY/MM/DD 13:55:18 nnnn *CANCELLED 0000 119 <=== Error point here
USERO02F 1111 YY/MM/DD 14:23:00 nnnn *CANCELLED 119 <=== here corrected the problem(COND CODE not display)
USERO02F 2222 YY/MM/DD 14:24:50 nnnn JCL-ERROR 51 <=== here corrected the problem(COND CODE not display)
USERO02F 3333 YY/MM/DD 14:25:11 nnnn ABEND=S806 109 <=== here corrected the problem(COND CODE not display)