Smarts IP: How do you add a predefined setting to a polling group through DMCTL?
Article ID: 331979
Updated On:
Products
VMware Smart Assurance
Environment
VMware Smart Assurance - SMARTS
Resolution
How can you apply an existing setting "Connectivity Polling for Wireless Devices" to an existing Polling Group called "WirelessControllers".
Even though this setting is normally a default setting, it had been removed for some reason on hundreds of IP domains in the environment.
Although this setting can easily be changed in the Global Console GUI, is there a solution that would allow this change to be made with DMCTL so that it could be scripted? Yes.
The following command line will make "Connectivity Polling for Wireless Devices" an active setting on the "WirelessControllers" polling group:
./dmctl <Server_name> -b <broker_port> invoke Configuration::"CFG-Polling Groups/WirelessControllers" makeSetting "Wireless_Connectivity_Polling_Setting"
Even though this setting is normally a default setting, it had been removed for some reason on hundreds of IP domains in the environment.
Although this setting can easily be changed in the Global Console GUI, is there a solution that would allow this change to be made with DMCTL so that it could be scripted? Yes.
The following command line will make "Connectivity Polling for Wireless Devices" an active setting on the "WirelessControllers" polling group:
./dmctl <Server_name> -b <broker_port> invoke Configuration::"CFG-Polling Groups/WirelessControllers" makeSetting "Wireless_Connectivity_Polling_Setting"
Feedback
Yes
No
Powered by
