S0C4 WHEN REPRINTING USING ALTERNATE SAR PANEL UNDER ISPF

Products

• Deliver
• View

Issue/Introduction

Issue:

After upgrading to CA VIEW 12.2 and selecting a CA Deliver processed report for reprinting using the 'P' option for online printing.  Enter the 'SAR' command to display the alternate print attributes panel. Press 'ENTER' to print the sysout via TSO/SARSPF getting an 878-10 abend, and sometimes an SOC4 abend.  When using the Roscoe interface a S16E abend may occur. See TSO Screen below:

System abend code = 878

Reason code = 04

ISPF Release Level : 6.3.0000

Module name . . . : SARSPF

Entry point address 09F1BF78

 

PSW . . . . . . . : 078D2000 80D93D70

Register content:

R0     00000000 - 00000001       R1    00000000 - 0002B098

R2     00000000 - 0A054DED      R3    00000000 - 00000040

R4     00000000 - 0000D400       R5    00000000 - 00000008

R6     00000000 - 00000000       R7    00000000 - 0002B098

R8     00000000 - 0004D6C4      R9    00000000 - 09F1FEC0

R10   00000000 - 00D940D9     R11   00000000 - 80D930DA

 

Environment: 

Product:  CA View 12.2

Platform: OS

 

Resolution:

APAR #: RO73504

Product: VIEW Release: 12.2 Solution #: 15 Type:

OS: OS Group: OMXCOM GBL SUP 1

Title: S0C4 WHEN REPRINTING USING ALTERNATE SAR PANEL UNDER ISPF

 

Additional Information:

As always, please contact CA Technologies support for CA View/Deliver if you have further questions.

 

 

 

 

 

 

 

Environment

Release: OUTDTI00200-12.1-Deliver-Output Management-Interface for Native TSO
Component: