Sysview has a line command: LMID
LMID invokes the LISTDIR command with the MODID keyword for the selected data set.
In Sysview:
- Enter command “ASID jobname” (of your MUF or running DBUTLTY job address space)
- Enter command “DSALLOC” (to see the data sets including the STEPLIB allocated to the anchored ASID)
- Enter line command “LMID” (in the Cmd column to the left of the desired load library)
Notice the “FixLevel“ shows the level for each module when an RMID(rmid) value is present.
Some sample displays...
ASID <jobname>
DSALLOC results…
Jobname <jobname> ASID 0088 Jobid JOB24657
Interval n/a
---------------------------------------------------------------------------
Cmd DDname DatasetName Volser Devn
IEFINDMY DUMMY
STEPLIB <hlq>.V151.CUSLIB vvvvvv 8C1F
. <hlq>.CABDLOAD vvvvvv 224F
PXX <hlq>..PXX vvvvvv 8C6D
SYSPRINT SYSOUT=*
STATUSJB SYSOUT=*
SNAPER SYSOUT=*
CAOESTOP SYSOUT=*
Type LMID in the Cmd column of the DSALLOC display for the specified load library.
LMID display of a portion of the results...
Dsn <hlq>.CABDLOAD Volser vvvvvv Unit 3390-9
Mbrs 815 DirBlk 127 Used 127 LRecl 0 BlkSize 32760 RecFm U
------------------------------------------------------------------------------
*
Cmd Name TTR Alias-Of IdName Release Bld FixLevel AsmDate AsmTm
…
DBACRPR 000615 DBACRPR r15.1 SO01724 04/30/18 10:21
DBACUPR 00065A DBACUPR r15.1 SO03827 07/13/18 13:10
. . DDCALL r15.1 RO91719 08/23/16 17:22
DBAFNPR 000464 DBAFNPR r15.1 RO93454 12/07/16 18:23
DBASTPR 000015 DBASTPR r15.1 12/31/15 11:45
DBBFLPR 00049B DBBFLPR r15.1 RO94095 01/23/17 18:31
DBBFMPR 000662 DBBFMPR r15.1 SO04538 08/10/18 18:19
DBBFWPR 000653 DBBFWPR r15.1 SO04298 07/13/18 12:10
DBBLDPR 000016 DBBLDPR r15.1 12/31/15 11:45
DBCAPPR 000633 DBCAPPR r15.1 SO01804 06/05/18 12:47
DBCCIPR 000017 DBCCIPR r15.1 12/31/15 11:45
DBCCMPR 000436 DBCCMPR r15.1 RO92436 10/28/16 15:05
DBCDRPR 000313 DBCDRPR r15.1 12/31/15 11:45
. . BEGIN r15.1 12/31/15 11:46
DBCDSPR 000314 DBCDSPR r15.1 12/31/15 11:46
. . BEGIN r15.1 12/31/15 11:46
DBCFMPR 0005F0 DBCFMPR r15.1 RO99997 03/07/18 13:39
… more…