VMware ESXi 6.5, Patch ESXi650-201707212-UG: Updates vmware-esx-esxcli-nvme-plugin VIB

Products

• VMware

Issue/Introduction

Release date: July 27, 2017

Patch Category	Bugfix
Patch Severity	Important
Build	For build information, see KB 2149910.
Host Reboot Required	No
Virtual Machine Migration or Shutdown Required	No
Affected Hardware	N/A
Affected Software	N/A
VIBs Included	VMware_bootbank_vmware-esx-esxcli-nvme-plugin_1.2.0.10-1.26.5969303
PRs Fixed	1829440
Related CVE numbers	N/A

Resolution

Summaries and Symptoms

This patch updates the vmware-esx-esxcli-nvme-plugin VIB to resolve the following issues:

• Some Intel devices, for example P3700, P3600, and so on, have a vendor specific limitation on their firmware or hardware. Due to this limitation, all IOs across the stripe size (or boundary), delivered to the NVMe device can be affected from significant performance drop. This problem is resolved from the driver by checking all IOs and splitting command in case it crosses the stripe on the device.

Patch Download and Installation

The typical way to apply patches to ESXi hosts is through the VMware vSphere Update Manager. For details, see the Installing and Administering VMware vSphere Update Manager.

ESXi hosts can be updated by manually downloading the patch ZIP file from the VMware download page and installing the VIB by using the esxcli software vib command. Additionally, the system can be updated using the image profile and the esxcli software profile command. For details, see the vSphere Command-Line Interface Concepts and Examples and the vSphere Upgrade Guide.