Smarts SAM/Cisco: After a cold reboot, SNMPv3 traps coming into Smarts SAM from a Cisco device stop generating Notifications
book
Article ID: 327657
calendar_today
Updated On:
Products
VMware
Issue/Introduction
Symptoms:
After a cold reboot, SNMPv3 traps coming into Smarts SAM from a Cisco device stop generating Notifications
Incoming SNMPv3 Traps from a Cisco device stop generating Smarts SAM Notifications after cold reboot
Environment
VMware Smart Assurance - SMARTS
Cause
After a cold reboot, the SNMPv3 traps coming from Cisco devices violate the SNMPv3 specification. This is because the reboot count does not increment and the timestamp goes down from the last message.
Resolution
This is a known problem with the Cisco IOS firmware that is resolved in IOS version 12.2 (33) SXI-2a. Contact your Cisco representative to obtain this firmware upgrade.