How do I rediscover the LSP removed from the topology in Smarts MPLS?
search cancel

How do I rediscover the LSP removed from the topology in Smarts MPLS?

book

Article ID: 327638

calendar_today

Updated On:

Products

VMware Smart Assurance

Environment

VMware Smart Assurance - SMARTS

Resolution

How do I rediscover the LSP removed from the topology in Smarts MPLS?



To rediscover the LSP that was removed from the topology, it is necessary to rediscover the device.

The device will then pickup the LSP in the MPLS-TE-STD-MIB table (.1.3.6.1.2.1.10.166.3).  In a snmpwalk of a device, you can check the existence of these LSPs by searching ".1.3.6.1.2.1.10.166.3.2.2.1.5" for the name of the missing LSP.

If the MIB does not contain the LSP information, then the LSP is built through the CLI command.

If the information is in neither, then no LSP will be built.