vSAN host not going into maintenance mode, Hung when choosing ensure accessibility
book
Article ID: 326491
calendar_today
Updated On:
Products
VMware vSAN
Issue/Introduction
Symptoms:
vSAN host failing to go into maintenance mode with ensure accessibility. The host is hung at some % value.
Cause
CLOMD process on host has stopped running. Validate this by running /etc/init.d/clomd status
Resolution
Restart CLOMD process on the host not going into maintenance mode
Log into the host and run the following command.
/etc/init.d/clomd restart
Feedback
thumb_up
Yes
thumb_down
No