NSX Network Detection and Response - Unable to delete Lastline Hosted Sensors after deregistration
Article ID: 323933
Updated On:
Products
VMware
Issue/Introduction
Symptoms:
When you try to delete hosted sensor (which is already deregistered) from the Lastline portal, the Delete appliance button does not give any result, only the Cancel button works.
When you try to delete hosted sensor (which is already deregistered) from the Lastline portal, the Delete appliance button does not give any result, only the Cancel button works.
Cause
This issue can occur when there is a large amount of data being deleted alongside each appliance at the backend.
Resolution
This is a known issue affecting Lastline hosted release 1330.1. There is currently no resolution.
Workaround:
To manually delete a hosted sensor from the backend, contact VMware Support and note this Article ID (90373) in the problem description. Please wait at least 24 hours before reaching out to VMware support after delete is attempted for deregistered sensor.
Workaround:
To manually delete a hosted sensor from the backend, contact VMware Support and note this Article ID (90373) in the problem description. Please wait at least 24 hours before reaching out to VMware support after delete is attempted for deregistered sensor.
Feedback
Yes
No
Powered by
