On an ESXi host prepared for NSX-T, we see log entries: "root ruleset is empty" and "failed to find anchor rule"
book
Article ID: 322526
calendar_today
Updated On:
Products
VMware NSX Networking
Issue/Introduction
Symptoms:
On the ESXi host, we see multiple log entries in the log file /var/run/log/vmkernel.log, as below:
2023-08-14T12:51:16.678Z cpu5:2102684)root ruleset is empty 2023-08-14T12:51:16.678Z cpu5:2102684)failed to find anchor rule
You have Service insertion (SI) filters enabled.
Environment
VMware NSX-T Data Center
Cause
This log spew issue is observed when SI filter is created and occurs when there's a delay when pushing the configuration, whish leads to flood of logs entries.
Resolution
This issue is resolved in NSX-T Data Center 3.2.3 available at VMware downloads.