VMware SD-WAN Edge : Changing the CELL carrier firmware preference
search cancel

VMware SD-WAN Edge : Changing the CELL carrier firmware preference

book

Article ID: 321947

calendar_today

Updated On:

Products

VMware SD-WAN by VeloCloud

Issue/Introduction

There are some scenarios where the modem won't come up with generic firmware settings i.e default network ("other" from VCO UI). Ideally, each network carrier comes up with a set of configuration parameters (firmware plus carrier configuration pairs).
So, we should set the Image management preference as per the carrier. 

Methods to Change the Carrier Firmware preference

Selecting the carrier firmware from VCO UI:-
Changing the Carrier Firmware preference from the CLI

Environment

VMware SD-WAN by VeloCloud

Resolution

Selecting the carrier firmware from VCO UI:-

From VCO, go to Edge -> Device Settings -> CELL1 -> CELL Settings -> Network

Graphical user interface, application, table  Description automatically generated

Starting from 5.x release, “Telstra” and “Vodafone” firmware can also be selected as the network carrier from the VCO UI