ENS driver compatibility in ESXi 6.7.x and 7.0
book
Article ID: 321248
calendar_today
Updated On:
Products
VMware vSphere ESXi
Issue/Introduction
Symptoms:
While enabling ENS on the uplink port on the ESXi 6.7.x with VDS 7.0.x host, you experience this symptom:
The ENS driver interworking fails.
Environment
VMware vSphere ESXi 7.0.0
VMware vSphere ESXi 6.7
Cause
This issue occurs when NIOC is enabled on the DVS.
NetIOC is not supported on ENS with vSphere 7.0.
Resolution
To resolve this issue, install the drivers as per the Compatibility Matrix. For more information, see the VMware Compatibility Guide.
ESXi 7.0 + NSX-T 3.0 with ENS drivers
Driver | Supportability |
ENS driver 6.7 + N-VDS | Supported |
ENS driver 6.7 + VDS 7.0 | Supported Notes:
- However, it will fail while enabling ENS on the Uplink Port
- NETIOC needs to be disabled.
|
ENS driver 6.7 + NetIOC | Not Supported |
ENS driver 7.0 + N-VDS | Supported |
ENS driver 7.0 + VDS 7.0 | Supported |
Feedback
thumb_up
Yes
thumb_down
No