Taking the ESXi host out of maintenance mode fails in NSX
Article ID: 318250
Updated On:
Products
VMware NSX for vSphere
Issue/Introduction
Taking an ESXi host on maintenance mode fails although the expected VIBS are successfully installed.
Environment
VMware NSX for vSphere 6.3.x
Cause
This issue occurs due to the sanity check failing after the upgrade.
After an upgrade, an NSX sanity check is done. If the sanity check fails for some reason, NSX does not take the ESXi host out of maintenance mode.
After an upgrade, an NSX sanity check is done. If the sanity check fails for some reason, NSX does not take the ESXi host out of maintenance mode.
Resolution
This issue is resolved in VMware NSX for vSphere 6.3.3.
To work around this issue if you do not want to upgrade, manually reboot the ESXi host. Once the reboot completes, manually remove the ESXi host out of maintenance mode.
To work around this issue if you do not want to upgrade, manually reboot the ESXi host. Once the reboot completes, manually remove the ESXi host out of maintenance mode.
Additional Information
To be alerted when this document is updated, click the Subscribe to Article link in the Actions box
in the Actions box.
in the Actions box.
Feedback
Yes
No
Powered by
