Smarts IP 10.1.2 Patch 1 has a duplicate entry for .1.3.6.1.4.1.9.1.2658 in the local /oid2type_Cisco.conf file

Products

• VMware Smart Assurance

Issue/Introduction

To Inform customers on how to resolve this issue

Symptoms:
In the IP domain log for SMARTS service assurance 10.1.2.1

DSCV-W-While loading oid2type files, the following entries are duplicate .1.3.6.1.4.1.9.1.2658 in file: /opt/InCharge/IP/smarts/local/conf/discovery/oid2type_Cisco.conf # Cisco ASR 9901 Router .1.3.6.1.4.1.9.1.2658 {

Environment

VMware Smart Assurance - SMARTS

Cause

The Basedir IP/smarts/local/conf/discovery/oid2type_Cisco.conf has a duplicate entry for the Cisco ASR 9901 Router .1.3.6.1.4.1.9.1.2658

Resolution

Please use the following certification and delete the other cert that is for this same device.  This will be resolved in the next quarterly release.  

# Cisco ASR 9901 Router
.1.3.6.1.4.1.9.1.2658 {
    TYPE                                                           = Router
    VENDOR                                                     = Cisco
    MODEL                                                       = ASR 9901
    CERTIFICATION                                        = CERTIFIED
    CONT                                                          = Cisco-Entity
    HEALTH                                                      = Cisco-ASR9k-EntSensor
    VLAN                                                          = Cisco-CVI-Vlan
    NEIGHBOR                                                = LLDP-CDP

INSTRUMENTATION:
    Card-Fault                                                 = CiscoEntityFRU
    Environment                                             = CiscoEntityFRU:DeviceID
    CPU/Memory                                            = CiscoRouter:DeviceID
    Interface-Fault                                          = MIB2
    Interface-Performance                           = CiscoRouter
    Interface-Ethernet-Performance          = CiscoRouter_Ethernet
}


Workaround:
Copy and rename the <Basedir>/IP/smarts/local/conf/discovery/oid2type_Cisco.conf

A)  Download the attached file, and restart your IP domain(s) so that the desired certification is in place and this will also remove the duplicate log message. Or,

B)  Delete the following certification from your file: 

# Cisco ASR 9901 Router
.1.3.6.1.4.1.9.1.2658 {
    TYPE                                = Router
    VENDOR                              = Cisco
    MODEL                               = ASR 9901
    CERTIFICATION               = CERTIFIED
    CONT                                = Cisco-Entity
    HEALTH                              = Nexus-Entity
        VLAN                            = Cisco-CVI-Vlan
        NEIGHBOR                        = LLDP-CDP

INSTRUMENTATION:
    Card-Fault                         = CiscoEntityFRU
    Environment                        = CiscoEntityFRU:DeviceID
    CPU/Memory                         = CiscoRouter:DeviceID
    Interface-Fault                    = MIB2
    Interface-Performance              = CiscoRouter
    Interface-Ethernet-Performance     = CiscoRouter_Ethernet
}


Save your edited file,

Restart your IP domain(s) so that the desired certification is in place and this will also remove the duplicate log message.

Additional Information

Impact/Risks:
The cert used may not reflect the latest certification for the device