VMware vCenter Server 8.x
There should be no firmware version check required for VMD controllers, we only need to check the driver name and driver version to be installed on the VMD controller against the vSAN VCG. But we currently have a bug in the code, due to which there is an attempt to perform firmware version check.
This is fixed in vCenter Server 8.0U1 and later.
Workaround:
If the user observes the above mentioned symptoms and verifies that the firmware reported in the PCI device listings on the HCL UI is empty, then the HCL warning can be ignored. If the remediation setting was set to block upgrades upon HCL issues, then this remediation setting *should be turned off* so that the upgrades would not be blocked by this HCL issue.
Notes:
As long as no firmware version showing on "Driver and Firmware in the Cluster's image", the warning will appear, and manually verification on the compatibility of driver/firmware is required.
Unable to determine compliance because the firmware version cannot be read from the device. Manually verify firmware compliance