book
Article ID: 309360
calendar_today
Updated On:
Issue/Introduction
Symptoms:
物理から仮想へ(P2V)の変換により作られた Windows7 の仮想マシンの起動に失敗する。
仮想マシンは起動時、黒い画面に次のエラーを表示する。
No physical memory is available at the location required for the Windows Boot Manager. The System can not continue.
Environment
VMware vCenter Converter 4.1.x
VMware vCenter Converter 4.2.x
VMware vCenter Converter 4.0.x
Cause
この問題は仮想マシンに指定されたメモリが少なすぎる場合に発生します。
Resolution
この問題を解決するには、メモリの設定を編集します。
メモリの設定を編集する手順は次のとおり :
- vSphere Client を起動する
- 仮想マシンをパワーオフする
- 仮想マシンを右クリックし、設定の編集をクリックする
- ハードウエアタブよりメモリを選択する
- 仮想マシンのメモリサイズを設定する。ゲストオペレーティングシステムに推奨される最小のサイズ、ないしそれ以上の値を設定する
- OKをクリックし、仮想マシンをパワーオンする
Additional Information
この回避策を適用後次のエラーが表示される場合は Converting a virtual IDE disk to a virtual SCSI disk (1016192) をご参照ください。
Windows failed to start. A recent hardware or software change might be the cause.
If Windows files have been damaged or configured incorrectly, Startup Repair can help diagnose and fix the problem.
Booting a Windows 7 virtual machine that was created from P2V fails with the error: No physical memory is available at the location required for the Windows Boot Manager