How to Disable Performance Polling for Interfaces within Smarts Availability Manager.
Article ID: 304293
Updated On:
Products
VMware
Environment
VMware Smart Assurance - SMARTS
Resolution
How to Disable Performance Polling for Interfaces within Smarts Availability Manager.
Disabling performance for an interface can be accomplished by configuring the threshold of the Interface group to 100%. If the particular settings are not presently enabled, then the user must re-enable them.
Disabling performance for an interface can be accomplished by configuring the threshold of the Interface group to 100%. If the particular settings are not presently enabled, then the user must re-enable them.
Additional Information
For example: If a user was receiving High Utilization notifications for an Interface, they will likely remove the Ethernet Interface/Port Performance setting. It will need to be added back in for the Interface group. Set the Utilization Threshold and all other settings under the Interface/Port performance to 100%. Select reconfigure and all Performance Notifications will Clear.
Feedback
Yes
No
Powered by
