Smarts IP/HSRP: IP addresses are layered over Interfaces but not evident in HostAccessPoints
book
Article ID: 303927
calendar_today
Updated On:
Products
VMware
Issue/Introduction
Symptoms:
IP addresses are layered over Interfaces but not evident in HostAccessPoints
Environment
VMware Smart Assurance - SMARTS
Cause
The IP addresses are Hot Standby Router Protocol (HSRP) IP addresses. Virtual HSRP addresses do not get added to HostsAccessPoints.
Resolution
You can check to see if an IP address is a virtual HSRP address by looking at the cHsrpGrpVirtualIpAddr OID (.1.3.6.1.4.1.9.9.106.1.2.1.1.11.). If this object contains an IP address for an interface, then it will not be displayed as a HostAccessPoint.