Intel esxcli plug-in for managing Intel(r) Ethernet Network Adapters
book
Article ID: 301694
calendar_today
Updated On:
Products
VMware vSphere ESXi
Issue/Introduction
This article provides information about the Intel esxcli plug-in which is an Ethernet Network Adapter Management tool for Intel Ethernet Network Family of products, providing the following key features:
Enable/Disable VF trust mode
Enable/Disable VF spoof-check
Query current settings for VFs
Disclaimer: The software included with this message is accompanied by a software license that describes the terms, conditions, and restrictions for installing and/or using the software. Installing, copying, and/or using the software indicates your acceptance of the terms, conditions, and restrictions in the accompanying license. If you do not accept the software license, do not install/copy/use the software and return the attached items to Intel.
Resolution
Product Overview What’s New?
This release of the Intel esxcli plug-in tool includes product support for the Intel Ethernet 700 Series Network Adapters.
Notes: Setting a VF is non-persistent - It is required to set a VF to the desired operation every time after rebooting a VM or host since ESXi kernel may assign a different VF to the VM after reboot.
If assistance is needed with the installation, or if problems occur using the tool, contact Intel Customer Support.
The Intel esxcli plug-in tool supports the following adapters:
Intel® Ethernet Network Adapter X722-DA4
Intel® Ethernet Network Adapter X722-DA2
Intel® Ethernet Network Adapter XXV710-DA2 for OCP*
Intel® Ethernet Network Adapter X710-DA2 for OCP*
Intel® Ethernet Network Adapter XXV710-DA2
Intel® Ethernet Network Adapter XXV710-DA1
Intel® Ethernet Network Adapter XXV710-DA1 for OCP*
Intel® Ethernet Network Adapter XXV710-T4
Intel® Ethernet Network Adapter XL710-QDA2 for OCP*
Intel® Ethernet Network Adapter XL710-QDA1 for OCP*
Restart the ESXi host daemon /etc/init.d/hostd restart
"intnet" namespace in esxcli will be accessible to configure aforementioned features if the plug-in install is successful.
System Requirements The Intel esxcli plug-in tool is supported on ESXi 6.5, and 6.7 operating system versions: 6.5 & 6.7
Note: On ESXi systems, the tool only works on Intel Ethernet 700 Series Network Adapters using the Intel ESXi i40en driver. The user will need to set their ESXi host acceptance level to PartnerSupported in order to install the tool.
Contact Information For Intel esxcli plug-in tool Software Support, see https://www.intel.com/content/www/us/en/support/contact-support.html