Report Update Timeframes
Article ID: 283214
Updated On:
Products
CloudHealth
Issue/Introduction
Below is a breakdown of the frequency associated to how often report data is updated:
| Metric / Topic | Time (s) |
|---|---|
| Pulse Reports | 24 hr |
| Dashboard | 4 hr |
| CloudWatch Data | 24 hr |
| Check buckets for bills (and download if any) / Account Setup | 15-30 min - unless it is a large account |
| CloudTrail Logs appearing after setup | 30 min |
| Cost & Usage Reports (InterActive reports) | 24 hr - nightly |
| InterActive Reports (w/ Perspective Change) | 24 hr but gets regenerated after perspective changes - 2 hr |
| Tag addition/changes get reflected in the platform | 15 min or 4 hr for Snapshots |
| AWS Lambda resources | ~2 hr |
| Asset Information | Most assets: 15 min. CloudFormation, EMR, Snapshots: 4 hr |
| Agent Information | Sampling is configurable. Information is injected into the platform depending on the configuration set. Data is pushed from agent to CloudHealth platform every hour |
| Performance Statistics (Metrics Reports) | Not earlier than 9 AM EST for previous day data (with a 1-3 hr buffer) |
| S3, Glacier, Volume, and Data transfer in/out | 24 hr |
| AWS Config Setup | 30 min |
| AWS Account Changes | 4 hr |
Resolution
Note that some reports may not automatically update if they haven't been accessed in more than 30 days. When a stagnant report is accessed, it will kick off a new processing run to get it up to date which may take 24 hours to complete.
Feedback
Yes
No
Powered by
