GIM39302E SHELL SCRIPT, GIM69168E HFSCOPY, or BPXF140E Return Code=90 errors applying maintenance
Article ID: 282212
Updated On:
Products
Issue/Introduction
When applying View/Deliver or Web Viewer maintenance the SMP/E APPLY fails with errors similar to the following:
GIM69168E * HFSCOPY PROCESSING TO THE CCAFHFBN LIBRARY FAILED FOR HFS CAHVLG4J IN SYSMOD LU13047. THE RETURN CODE (12)
EXCEEDED THE ALLOWABLE VALUE. DATE nn.nn - TIME nn:nn:nn - SEQUENCE NUMBER 000001.
GIM30216I APPLY PROCESSING FAILED FOR SYSMOD LU13047. SYSTEM UTILITY PROCESSIING FAILED FOR AN ELEMENT IN LU13047.
BPXF150I MVS DATA SET WITH DDNAME SYSUT1 SUCCESSFULLY COPIED INTO BINARY HFS FILE /CAI/WEBVIEWER/CAHVLG4J.
BPXF140E RETURN CODE 00000090, REASON CODE 0549010C. A LINK FAILED FOR LINK NAME /CAI/WEBVIEWER/../log4j2.xml.
- or possibly -
GIM39302E ** SHELL SCRIPT CAHVCPSH PROCESSING FOR THE HFS CAHVCFG IN THE CCAFHFBN LIBRARY FAILED FOR SYSMOD SO13818.
SEQUENCE NUMBER 000011.
GIM30227E ** APPLY PROCESSING FAILED FOR SYSMOD SO12768 BECAUSE PROCESSING FAILED FOR SYSMOD SO13818. SYSMOD SO13818
CONTAINS HIGHER LEVELS OF COMMON ELEMENTS.
GIM30236I APPLY PROCESSING FAILED FOR SYSMOD SO13818. SHELL SCRIPT PROCESSING FAILED FOR AN ELEMENT IN SYSMOD SO13818.
GIM30202E ** APPLY PROCESSING FAILED FOR SYSMOD SO11199. ALL SYSMODS THAT WOULD HAVE SUPERSEDED SO11199 HAVE FAILED.
Environment
z/OS, View , CA View , Deliver , CA Deliver ,14.0, HFS, ZFS, MOUNT, POINT, APPLY, SMP, MAINTENANCE, SHELL, SCRIPT, web viewer, CAHVCPSH, CAHVCFG, CCAFHFBN, UNIX, USS, SMP/E, GIM39302E SHELL SCRIPT, GIM69168E HFSCOPY, or BPXF140E Return Code=90
Cause
USS file system not mounted or wrong mount point specified.
Resolution
A common cause of the SHELL SCRIPT errors is that either the USS file system created during the BASE INSTALL of the product is not MOUNTED. Or, a customer specified the MOUNT POINT for the USS file system incorrectly. To that end, initial questions & suggestions are:
- Determine what specific ZFS file system was used for your BASE install of View\Deliver.
- Is that file system mounted on the system you are running the APPLY on?
- Take a look at FILE ALLOCATION REPORT in your apply output. If your path to CCAFHFBN ends with /CA/ - Example: '/broadcom/view/webviewer/CA/'
* Then you need to make sure that the correct file system is mounted before you run the APPLY.
- When you mount the CCAFHFBN file system, you MUST specify the MOUNT POINT as: /broadcom/view/webviewer/
* (i.e. DO NOT INCLUDE the /CA/ at the end of the mount point specification).
Example:
Assuming that "<yoursys>.<omvs>.BROADCOM.ZFS" is the correct ZFS file system, from the View\Deliver base install, then the CORRECT mount point for this USS file system would be specified as: /broadcom/view/webviewer/
--------------------------------------------------------------------
Mount a File System
Mount point:
More: +
/broadcom/view/webviewer/
________________________________________________________________
File system name '<yoursys>.<omvs>.BROADCOM.ZFS'_________________
File system type ZFS__ New owner . . . . . ____________________
--------------------------------------------------------------------
- Using the above guidelines, get the correct USS file system mounted on the system you are running the APPLY job on, and make sure you have specified the correct MOUNT POINT for that file system.
- Then try rerunning the APPLY.
Feedback
