ESF4213 JNI CallStaticIntMethod failed with RC=10 Web Viewer 14.0
Article ID: 280086
Updated On:
Products
Issue/Introduction
When starting the java transformer task after an IPL, it fails to start with the following message in the D2ELOG
ESF4200
ESF4213 JNI CallStaticIntMethod failed with RC=10
ESF4209 Initialization failed. Correct above problems and restart FSS
Environment
Spool 14.0
Web Viewer 14.0
Cause
The filesystem for the Java Transformer started task was mounted Read/Only (R/O) and needs to be mounted Read/Write (R/W).
Resolution
After changing the mount value to Read/Write (R/W) and restarting the task, the problem was resolved.
Additional Information
From the online documentation - Return Codes
Return code 10 -- Processing ended prematurely. An XML syntax error exists in *.d2eproj, *.d2emfct, or *.d2esys. For example, an XML construct is not closed properly, or a comment exists inside an XML construct.
This error can also occur if the Java FSS task does not have the authority to read and write to the USS directories in CE0CPARM(CAIQENVA). No information appears in D2ELOG or in system.log.
Feedback
