S0C1 on running HSSR Unload Utility and DL/I user program

Products

• Compress Data Compression (IMS Tools)

Issue/Introduction

Since Compress for IMS is upgraded from 5.2.5 to 20.0, several jobs receives S0C1 abend.
The same job on the old environment in 5.2.5 works fine.

HSSR Unload Utility

IEA995I SYMPTOM DUMP OUTPUT  919
SYSTEM COMPLETION CODE=0C1  REASON CODE=00000001
 TIME=09.53.45  SEQ=00169  CPU=0000  ASID=006E
 PSW AT TIME OF ERROR  078D0000   8000A4B2  ILC 2  INTC 01
   ACTIVE MODULE           ADDRESS=00000000_00008118  OFFSET=0000239A
   NAME=program
   DATA AT PSW  0000A4AC - 00000000  00000000  00000000
   GR 0: 00000048   1: EBBAABBE
      2: 000771A0   3: 9C0E2752
      4: 00000000   5: 9C0E272C
      6: 1C0EAB68   7: 1C0E241A
      8: 0000A4B0   9: 0000FEB8
      A: 1C0EAB68   B: 1C0E1054
      C: 9C0E2710   D: 1C0E81A0
      E: 9C0E2764   F: 1C0E1AE8
 END OF SYMPTOM DUMP

 

DL/I user program

IEA995I SYMPTOM DUMP OUTPUT  857
SYSTEM COMPLETION CODE=0C1  REASON CODE=00000001
 TIME=14.04.51  SEQ=05418  CPU=0000  ASID=0064
 PSW AT TIME OF ERROR  478D0000   8000A4B2  ILC 2  INTC 01
   NO ACTIVE MODULE FOUND
   NAME=UNKNOWN
   DATA AT PSW  0000A4AC - C4E6C140  00000000  00000000
   GR 0: 00000048   1: EBBAABBE
      2: 0011A4E8   3: B3E44752
      4: 00000000   5: B3E4472C
      6: 33E4DB68   7: 33E4441A
      8: 0000A4B0   9: 00008EB8
      A: 33E4DB68   B: 33E43054
      C: B3E44710   D: 33E4A1A0
      E: B3E44764   F: 33E43AE8
 END OF SYMPTOM DUMP

 

Environment

Component : CMPIMS
Release : 20.0

Resolution

PTF LU13103 was published.

The PTF requires ACCEPT. Run CIMTSAMP(SHRCIN05) after PTF LU13103 is accepted.