SPC-OCC-10057: Error Importing SDM Configuration File
Article ID: 277758
Updated On:
Products
DX NetOps
Issue/Introduction
Receiving the following error when attempting to import SDM config file:
SPC-OCC-10057: Error Importing Configuration File. Please refer to the latest SDMConfigImportLog file created during this import attempt and/or the VNM.OUT file for details on the errors.
Environment
Spectrum
22.2.x
23.3.x
Cause
Missing entry for -remoteconnect entry in sdmconfig file.
Resolution
Update sdmconfig file with the SDC connector's ip address.
-remoteconnect remote_ipaddr[:remote_port]
You must import the sdm config file into DX NetOps Spectrum to put SDManager settings into effect on the SpectroSERVER.
Additional Information
https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/dx-netops/23-3/Fault-Monitoring-with-DX-Spectrum/managing-network/secure-domain-manager-sdm/installing-and-configuring-secure-domain-manager-processes/configure-sdconnector-process-settings.html
Feedback
Yes
No
Powered by
