RC/Migrator Compare Analysis receives abend S0C3 Reason 00000003 in RML@UF
Article ID: 271188
Updated On:
Products
Issue/Introduction
An RC/Migrator for Db2 for z/OS (RCM) compare strategy is created between a source Db2 11 NFM and a target Db2 11 CM Db2 subsystem.
The Compare Analysis fails with the following abend:
RMA365E *************************************************************
RMA365E *
RMA365E * RC/MIGRATOR ANALYSIS ABEND HAS OCCURED
RMA365E * RMA@ESTA GENERAL PURPOSE ESTAE EXIT ENTERED
RMA365E *
RMA365E * ABEND CODE WAS:S0C3. REASON CODE WAS: 00000003
RMA365E *
RMA365E * ABEND OCCURED IN RC/MIGRATOR MODULE: RML@UF
RMA365E * UNABLE TO DETERMINE ABENDING CSECT
RMA365E * MODULE LOAD ADDRESS: 12A07000
RMA365E * MODULE ENTRY ADDRESS: 12A25530
RMA365E * MODULE LENGTH: 0009E000
RMA365E * RMA@ESTA GENERAL PURPOSE ESTAE EXIT EXITING
RMA365E *
RMA365E *************************************************************
SYSTEM COMPLETION CODE=0C3 REASON CODE=00000003
PSW AT TIME OF ERROR 078D1000 92A2A544 ILC 4 INTC 03
ACTIVE MODULE ADDRESS=00000000_12A07000 OFFSET=00023544
NAME=RML@UF
DATA AT PSW 12A2A53E - 00004400 D5880000 00000000
Resolution
The RCM compare strategy having the issue is using a Db2 11 CM ssid as the target. Db2 11 CM is equivalent to a Db2 10 ssid which is no longer supported by RC/Migrator,
therefore the product forces a S0C3 abend.
The target needs to be upgraded to at least Db2 11 NFM.
Once the Target Db2 ssid was upgraded to Db2 11 NFM, the compare completed successfully.
Feedback
