Implementing SSL Interception from the SGAC Admin Console

Products

• SG-S400

Issue/Introduction

Implementing SSL Interception from the SGAC Admin Console

Environment

Release : 7.3.14.1

Resolution

Please be informed that the steps to implementing SSL Interception on ProxySG, using a CA certificate (instead of a self-signed one) is the same, whether we are doing this from the legacy java console or from the new SGAC admin console. So, the reference guide is the Tech. Article with the URL below.

https://knowledge.broadcom.com/external/article/168284/configure-ssl-interception-with-microsof.html

So, what's the difference?

The difference is only in the navigation. For the SGAC Admin Console, please refer to the snippets below, for requisite guidance, to accessing the "Keyrings", "CA Certificates", "SSL Proxy Settings", "Device Profiles", "SSL Client", & "OCSP".

"Keyrings":

"CA Certificates":

"Select" the certificate and "Apply" the change:

"SSL Proxy Settings":

"Device Profiles":

"SSL Client":

"OCSP":

For the SGOS Administration (Admin Console Edition) guide, reference has been made to the doc. with the URL below.

https://techdocs.broadcom.com/content/dam/broadcom/techdocs/symantec-security-software/web-and-network-security/proxysg/common/ProxySGAdminConsole.pdf