Display mapping in board is not honoring Range values in Display mapping
search cancel

Display mapping in board is not honoring Range values in Display mapping

book

Article ID: 260013

calendar_today

Updated On:

Products

Clarity PPM On Premise Clarity PPM SaaS

Issue/Introduction

Setting the Display Mapping on a field to use the Range Description and Value is not working as expected in the Board Layout. It works on the Grid. 

Steps to Reproduce: 

  1. Navigate to Administration, Attributes Grid 
  2. Select Investment 'Work Status' attribute 
  3. Select the Display Type as 'Range Description and Value'
  4. Navigate to Project grid, add 'Work Status' column 
  5. Validate the Range Description and Value is displayed 
  6. Navigate to the Board layout 
  7. Configure card and then add 'Work Status' 
  8. Validate that the Range Description and Value is shown

Expected Results: The 'Range Description and Value' should be displayed in the Board layout. 

Actual Results: 'Range Description and Value' is not displayed in the Board Layout. 

Workaround: Look at the information in the Grid layout. 

Environment

Release 16.1.1 

Cause

DE68399 

Resolution

Targeted Fix in Release 16.1.2