search cancel

UIM - Automate the process of robot removal from Windows

book

Article ID: 258378

calendar_today

Updated On:

Products

DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

You want to automate the process of robot removal from the windows system. 

Environment

Release : 20.x

Cause

This article is informational. 

Resolution

These commands can be used as a script to automate the process: 

sc stop NimbusWatcherService 
sc delete NimbusWatcherService 
"C:\Windows\System32\REG" DELETE HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{D4BD8ECF-3D32-4F3E-A4DB-A87052CFD4EA}_is1 /f 
"C:\Windows\System32\REG" DELETE HKEY_LOCAL_MACHINE\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{4337A496-6773-4624-985F-E203E1D08CC9} /f
rmdir /s /q <ROBOT> i.e. rmdir /s /q "C:\Program Files\Nimsoft"

Additional Information

This process will not completely decommission the robot from UIM but it will only remove the robot software from the Windows system. For completely removing the system from UIM see: Remove / Decommission Robots or HUBs from UIM (broadcom.com)